[H1] Piso Wifi Pause Time: How to Pause and Resume Your Session at 10.0.0.1

[H1] Piso Wifi Pause Time: How to Pause and Resume Your Session at 10.0.0.1

Piso wifi pause time is a portal feature that freezes a paid Piso WiFi countdown so remaining minutes are not used while you step away. It serves a customer who paid for time at a vendo machine, and an owner who decides whether the feature stays switched on. Tapping Pause at http://10.0.0.1 stops the timer on the same phone, and Resume restarts it from the same remaining time.

[H2] What You Need First

You need the same phone for the full session, a connection to the vendo WiFi, and payment ready before you start. Do this first, before anything else. Set the Wi-Fi address for that network to Fixed or Phone MAC before the first coin.

Check the rate list on the portal or the sticker before you pay. Rates change from machine to machine. If the portal will not open, use our 10.0.0.1 piso wifi login guide steps first.

[H2] What Is Piso Wifi Pause Time?

This feature freezes a paid countdown and suspends internet access, so remaining minutes stay held while you step away. Resume restarts the same countdown from the same remaining time, on the same device. It works if the owner switches the feature on and the session has not expired.

The portal is a captive portal page served by the machine at http://10.0.0.1, and it opens only while you stay connected to that WiFi network.

  • It does not add minutes.
  • It does not move a session to a different phone.
  • Turning off WiFi does not stop the timer on most builds, unless the owner enabled auto-pause on disconnect in AdoPiSoft.
  • It does not switch off mobile data, so apps can still use mobile data while the session stays paused.

Check the timer after you tap Pause, because a frozen timer is the proof the feature worked.

[H2] How to Pause Piso Wifi Time

Pause takes four steps, and the order matters. Start the session first, then pause, because a button for a session that has not started will not hold time.

[H3] Connect to the Piso WiFi Network

Join the network named on the machine, and stay on that network for the full session.

  1. Open WiFi settings on your phone and tap the network name shown on the machine.
  2. Turn off mobile data, so the phone does not route portal traffic over mobile data.
  3. Wait for Connected, no internet or a Sign in to network pop-up.

Most networks ask for no password. Ask the owner if one is requested.

[H3] Open the Portal at 10.0.0.1

Open the portal in a browser, with http at the start of the address.

  1. Open Chrome or Safari and tap the address bar at the top of the screen.
  2. Type http://10.0.0.1 with no spaces, then tap Go.
  3. Wait for the portal page with your remaining time, Insert Coin, Voucher, and Pause Time.

Do not type the address into a search box. A search box treats the digits as a search term and shows results instead of the portal.

[H3] Start Your Session With Coins, a Voucher Code, or GCash or Maya

Pay on the portal, then check the timer before you do anything else.

  1. Tap Insert Coin and insert coins within the waiting time shown on screen, or type a voucher code in the voucher box and tap Submit.
  2. On newer machines, tap the GCash or Maya option on the portal and complete payment in the e-wallet flow shown.
  3. Check that your remaining time appears on screen and the timer starts to move.

AdoPiSoft lists an example rate for the Philippines in its Wifi Rates guide. Owners can change the values.

Coin in AdoPiSoft example

Time

Data

₱1

5 minutes

50 MB

₱5

30 minutes

300 MB

₱10

1 hour

600 MB

Worked example: in that AdoPiSoft example, ₱10 buys 60 minutes. Use 12 minutes and tap Pause. Then 48 minutes remain when you resume, if the session has not expired. The rate on the machine in front of you can differ, so read its own rate list first.

[H3] Tap Pause Time and Check the Timer Stops

Pause from the same portal where you paid, on the same phone.

  1. Go back to http://10.0.0.1 on the same phone.
  2. Look at your remaining time, then tap Pause Time.
  3. Confirm the page shows Paused and the timer no longer moves.

Take a screenshot of the paused screen with the remaining time visible. The screenshot is the fastest proof if the owner needs to check the session log later.

[H2] How to Resume Piso Wifi Time

Say you paused before lunch and returned an hour later. Reconnect first, then open the portal, because a phone that joins mobile data first may never load the local page.

  1. Reconnect to the same Piso WiFi network on the same phone.
  2. Open http://10.0.0.1 in the same browser you used to pause.
  3. Tap Resume Time, Resume, or Continue, as labelled on that portal.
  4. Check that the timer moves again, then load a website to confirm internet access has returned.

If Resume does not appear, refresh the page first. Do not pay again until you check the remaining time and the troubleshooting steps below.

[H2] How Long Can a Session Stay Paused?

The honest answer: no single limit applies to every machine. Limits come from the firmware in the machine and the settings chosen by the owner, and expiry is a separate check from the pause limit.

[H3] Pause Limits by Firmware

LPB Piso WiFi sets a time cap. AdoPiSoft sets a pause count. PisoFi and JuanFi vary by build and owner settings, and no verified example for those two was opened in this run.

Behaviour

LPB Piso WiFi

AdoPiSoft

PisoFi

JuanFi

How pause is limited

Owner sets a maximum pause length

Owner sets a pause count per session

Owner sets a limit, varies by build

Depends on build, varies

Example or reported range

60 minutes typical, 10 minutes to 24 hours reported

10 pauses for 1 to 2 hour credits in AdoPiSoft doc example

No verified example opened

No verified example opened

Resume label

Resume Time

Continue or Resume

Resume, varies

Varies

Owner menu path

Portal Settings, Insert Coin Mode

Settings, User Portal Settings, Session Controls

Check session settings, varies

Check portal or session settings, varies

Auto-pause

Not verified in docs opened

Yes, if owner enables auto-pause on disconnect or internet down

Not verified

Not verified

So, AdoPiSoft is the best option for an owner who needs a pause count and auto-pause settings, because its own docs list those settings. LPB Piso WiFi suits an owner who needs a pause length set in minutes, if the reported range is confirmed on that build.

Ask the owner for the limit on that machine before a long pause.

[H3] Session Expiry While Paused

Expiry and pause limit are different checks. A pause limit caps one pause. Expiry caps the total life of the session, and it can end a session while it stays paused.

In the AdoPiSoft example, 1 to 2 hour credits carry a Pause Limit of 10x. Expiration is Session Time + 1 hour. A 2 hour session expires in 3 hours in that example. A session that passes expiry cannot be resumed, and the remaining time is lost. Ask the owner for the expiry on that machine, and resume before that point.

[H2] Piso Wifi Pause Time on Android, iPhone, and Laptop

The steps stay the same, and the menu names change by phone and browser. Set a fixed address before the first coin, so the machine still recognises the phone.

[H3] Android and Chrome

Chrome on Android needs mobile data off and a fixed address set before payment.

  1. Turn off mobile data and any VPN, then open Chrome.
  2. Set Private DNS to Off or Automatic in Network and internet settings.
  3. Open the connected network, open Privacy, and choose Use device MAC for that network.
  4. Type http://10.0.0.1 in the address bar and pause in Chrome, then resume in Chrome.

One browser for pause and resume avoids a cookie mismatch on portals that store a session in a browser cookie.

[H3] iPhone and Safari

Safari on iPhone often shows a portal pop-up on its own after you join the network.

  1. Turn off mobile data and any VPN, then join the Piso WiFi network.
  2. Open Settings, WiFi, tap the info icon for the network, and set Private Wi-Fi Address to Fixed for that network.
  3. If no pop-up appears, open Safari and type http://10.0.0.1 in the address bar.
  4. Tap Pause Time, then resume in Safari on the same phone.

No download is needed to pause, and the portal is the control page. For app listings, see our [INTERNAL LINK: Piso Wifi App | anchor: Piso Wifi App].

[H3] Samsung Phones

Samsung phones follow the same Chrome steps, with two extra checks in Samsung settings.

  1. Turn off Switch to mobile data in WiFi settings, so the phone does not leave the vendo network when the portal shows no internet yet.
  2. Set the MAC address type to Phone MAC for that network, in the gear icon beside the network, then View more.
  3. Turn Secure WiFi off for that network if the portal still will not load, then reopen the portal in the same browser.

[H3] Windows Laptop or Mac

Laptops follow the same steps, and a changing Wi-Fi address causes the same loss.

  1. Join the Piso WiFi network and unplug any network cable, so the laptop uses WiFi only.
  2. On Windows, set Random hardware addresses to Off in WiFi network properties. On Mac, set Private Wi-Fi address to Fixed or Off in WiFi Details for that network.
  3. Open Chrome or Edge, type http://10.0.0.1 in the address bar, and pause and resume in the same browser.

Set it before the first coin.

[H2] Piso Wifi Pause Time Not Working

Here is the part most guides skip: a missing button is usually a setting, not a broken phone. Check refresh, session, limit, address, then owner.

Problem

Likely cause

What to try

Portal will not load

Mobile data, VPN, Private DNS, or a typo in the address

Turn off mobile data and VPN, set Private DNS to Off or Automatic, type http://10.0.0.1 in the address bar

No Pause button

Owner switched the feature off, or the browser shows an old copy of the page

Refresh the page, check the session is active, ask the owner

Pause button disappeared mid-session

Pause limit reached, minimum remaining time, owner changed a setting, or phone changed its Wi-Fi address

Reconnect, refresh, check the fixed-address setting, ask the owner for the limit

Cannot resume on a different device

Session is tied to the device that started it

Resume on the original phone

Time ran out while paused

Pause limit or session expiry was reached

Check the limit before you leave, then pay again for a new session

Paused session vanished after a power cut

Machine restarted and cleared a locally stored session

Ask the owner, show your screenshot, do not leave a large balance paused

Use the table to pick your H3.

[H3] No Pause Button on the Portal

If the button stays missing after a refresh, the owner has not switched it on for that payment type. Not a phone fault.

  1. Refresh the portal in the same browser and check that a session is active with time left.
  2. Check whether you paid by coin or by voucher code. LPB Piso WiFi has separate Pause Time toggles for Insert Coin Mode and Voucher Code Mode.
  3. Check the remaining time, because a near-empty session can hide the button when the owner sets a minimum remaining time.
  4. Ask the owner to check Portal Settings or session settings, and to test as a customer.

No phone setting creates a button the owner switches off.

[H3] Portal at 10.0.0.1 Will Not Open

Find the gateway address on your own device, because that address is the portal address on that network.

Device

Where to look

What to read

Android

Settings, WiFi, tap the connected network

Gateway

iPhone

Settings, WiFi, tap the info icon

Router

Windows

Command Prompt, type ipconfig

Default Gateway

Mac

System Settings, Network, WiFi, Details, TCP/IP

Router

  1. Confirm you joined the Piso WiFi network, not a nearby network or a hotspot.
  2. Turn off mobile data and any VPN, set Private DNS to Off or Automatic, and type http:// plus the gateway address in the address bar.
  3. Check for typos. 10.0.0.0.1 has five number groups and is not valid. Https can force a secure page that fails. A search box shows results instead of the portal.

Reported alternates include 10.10.0.1, 10.5.50.1, 20.0.0.1, and 192.168.1.1. Use the gateway address from your device, not a guessed address. For portal faults beyond a typo, use our 10.0.0.1 not working fixes steps after the gateway check.

[H3] Pause Button Disappeared Mid-Session

Say you return, reconnect, and the button is gone. Check the remaining time first, because a session with no time left shows no button.

  1. Reconnect to the same network on the same phone and refresh the portal.
  2. Check the fixed Wi-Fi address setting for that network, because a changed address can break the match to your session.
  3. Ask the owner what pause limit and minimum remaining time apply on that machine, and whether a setting changed while you were away.

A screen lock that drops WiFi can break the match. Reconnect before you judge the button as gone.

[H3] Paused Session Vanished After a Power Cut or Reboot

A reboot does not always clear a paused session, and the result depends on the setting chosen by the owner.

AdoPiSoft lists an “automatically continue sessions after reboot” setting, so sessions resume on their own after a reboot when the owner enables it. Other builds can clear a paused session on restart. A sudden power cut is less certain than a clean restart. The machine may not finish writing session data before it stops. Show the owner your screenshot for a session log check. Treat unused minutes as same-day credit.

[H3] Cannot Resume on a Different Device

Sessions match by device, not by a login you can use anywhere. Resume on the phone or laptop that started the session, with the same Wi-Fi address setting you used at the start.

Reports of cloud-synced sessions that follow a user between machines exist for newer LPB Piso WiFi and PisoFi builds. No primary doc opened in this run confirms a transfer rule for a specific build. Ask the owner before you count on a transfer.

[H2] For Vendo Owners: How to Turn On Piso Wifi Pause Time

Admin section. The steps below are for the machine owner, not for a customer.

An owner turns the feature on in the admin panel, not in the customer portal. Test as a customer before customers use it. For a side-by-side menu comparison, see our [INTERNAL LINK: LPB vs AdoPiSoft comparison | anchor: LPB vs AdoPiSoft comparison].

[H3] Turn On Pause Time on LPB Piso WiFi

Sign in at the admin panel and switch on pause for coin and voucher sessions separately.

  1. Connect to the vendo network and open http://10.0.0.1/admin in the address bar.
  2. Sign in with the owner credentials for that machine. The reported default is admin / 123456789.
  3. Open Portal Settings, then Insert Coin Mode, and turn on Pause/Resume Time.
  4. Turn on Pause Time under Voucher Code Mode as well, then save the settings.
  5. Set a maximum pause length if the menu offers one, then connect as a customer and check that the Pause button appears.

Change the admin password at once after you sign in. The reported range is 10 minutes to 24 hours, with 60 minutes typical.

[H3] Turn On Pause Time on AdoPiSoft

AdoPiSoft controls pause by count, by voucher, and by auto-pause settings, not by one time cap alone.

  1. Connect to the vendo network and open http://10.0.0.1/admin in the address bar.
  2. Sign in with the owner credentials for that machine. Reported defaults are admin / admin on older builds and administrator / admin1234 on newer buildsOpen Settings, then User Portal Settings, then Session Controls, and enable Allow Pause Time in the Session Settings guide.
  3. Set the Pause Limit and session expiration for each credit range in Session Expiration and Pause Limits. Check the Allow Pause box for each voucher type in the Vouchers guide.
  4. Enable auto-pause on disconnect and auto-pause when the internet is down only if you want those behaviours. Enable auto-resume on reconnect and continue after reboot in the same way, then save and test as a customer.

In the AdoPiSoft example, 1 to 2 hour credits carry a Pause Limit of 10x. Expiration is Session Time + 1 hour. The TP-Link pause time guide recommends 3 to 5 attempts as a setting choice. It is not an AdoPiSoft default, so do not present that range as a factory value.

[H3] Turn On Pause Time on PisoFi and JuanFi

No single menu path was verified for PisoFi or JuanFi in this run. Do not follow an LPB Piso WiFi or AdoPiSoft path on those builds.

  1. Connect to the vendo network and open the admin panel with the credentials from the machine manual or seller, not a guessed default.
  2. Open the portal, session, or time-control settings for that build and look for a pause or session pause control.
  3. Enable the control, set a limit only if the menu offers one, save, and test with a short paid session as a customer.

[H3] Change the Admin Password After You Sign In

Change the password on the first day you take over a machine, and keep the new password private.

  1. Sign in at http://10.0.0.1/admin with the current owner credentials for that machine.
  2. Open the admin account or password setting, type a new password, and save.
  3. Sign out, sign in again with the new password, and test a short customer session to confirm the portal still works.

Reported defaults are publicly known. A machine left on a reported default can be opened by a person on the same network. The LPB Piso WiFi default is reported as admin / 123456789. AdoPiSoft defaults are reported as admin / admin on older builds and administrator / admin1234 on newer builds. The PisoFi default is reported as administrator / admin12345. If the current password is lost, a factory reset is the last resort. It wipes custom settings, so record the new password in a private place after the reset.

[H2] Tips for Piso Wifi Pause Time

  • Screenshot your remaining time before a long pause. Capture the Paused label and remaining time, so the owner can match it to the session log.
  • Set a fixed Wi-Fi address before the first coin. Set Private Wi-Fi Address to Fixed on iPhone, Use device MAC on Android, or Phone MAC on Samsung.
  • Type http:// by hand in the address bar. Type http://10.0.0.1 in the address bar, not the search box, and check for five number groups in 10.0.0.0.1.
  • Pause before you lock the phone. Tap Pause Time before the screen locks, because locking does not stop the timer on most builds.
  • Use one browser for pause and resume. Pause and resume in Chrome on Android or Safari on iPhone, to avoid a cookie mismatch.
  • Pay in small amounts when the limit is unknown. Start small, check the Pause button and timer, then add time after you know the limit.
  • Check the rate list before you pay. Read the portal rate list or sticker, because an owner rate can differ from the AdoPiSoft example.
  • Ask the owner for the pause limit before lunch. Ask for the maximum pause length, pause count, and expiry in one question.
  • Refresh the portal before you ask for help. Refresh in the same browser and check the remaining time, because a stale page hides a button.

Use the tip that matches your screen.

[H2] Frequently Asked Questions

Answers below start with a standalone answer.

[H3] What is piso wifi pause time?

It freezes a paid countdown and suspends internet access until you resume on the same device. The timer holds the minutes you already bought, and it adds no minutes. Expiry still applies while a session stays paused. A session can end even with the timer frozen, if the owner set an expiry that passes first.

[H3] How do I pause piso wifi time at 10.0.0.1?

Connect to the vendo WiFi, turn off mobile data, type http://10.0.0.1 in the address bar, and start a session. Then tap Pause Time and check the timer stops. Use the same phone for the full session, and screenshot the paused screen.

[H3] How do I resume piso wifi time?

Reconnect to the same WiFi network on the same phone. Open http://10.0.0.1 in the same browser, tap Resume Time or Continue, and check the timer moves again. If Resume is missing, refresh first and check expiry and the pause limit before you pay again.

[H3] Why is there no pause button on my piso wifi portal?

The owner has not switched the feature on for your payment type. The session may have no time left, or the page may be a stale cached copy. Refresh in the same browser, check the session is active, then ask the owner to check the coin and voucher toggles separately. No phone setting creates a button the owner switches off.

[H3] How long can I pause piso wifi time?

No single limit applies to every machine, because the firmware and the owner set the limit. LPB Piso WiFi uses a time cap, reported as 60 minutes typical with a 10 minute to 24 hour range. AdoPiSoft uses a pause count, with 10 pauses in its doc example for 1 to 2 hour credits.

[H3] Can I resume a paused piso wifi session on a different device?

Usually no, because sessions match by device, through a MAC or IP address, not by a login you can use anywhere. Resume on the phone or laptop that started the session, with the same Wi-Fi address setting. Reports of cloud-synced transfer exist for newer builds, but no primary doc opened in this run confirms a transfer rule.

[H3] Does turning off WiFi pause piso wifi time?

Usually no, because the clock keeps running after you disconnect on most builds. Tap Pause Time first, then disconnect if you want. AdoPiSoft is the exception when the owner enables auto-pause on disconnect, and the session then resumes on reconnect if that setting is on. Do not assume auto-pause is on.

Does piso wifi pause time work with a voucher code?

Yes, on machines where the owner switches on pause for voucher sessions, and AdoPiSoft adds a per-voucher Allow Pause box in its voucher settings. The timer starts when you redeem the code on the portal, not when you buy the code, on the machines covered in the AdoPiSoft docs.

Why did my paused piso wifi time disappear?

Expiry passed, the pause limit was reached, the phone changed its Wi-Fi address, or a restart cleared a locally stored session. Check the remaining time, the fixed-address setting, and the pause limit, then show the owner your screenshot for a session log check.

What is 10.0.0.0.1 in piso wifi pause time?

It is not a valid address, because it has five number groups and an IPv4 address has four numbers separated by three dots. Type http://10.0.0.1 instead, in the address bar, with no spaces. If that address still fails, read the gateway address on your device, because the machine in front of you can use a different gateway.

Can I pause piso wifi time on my iPhone?

Yes, through Safari on the same phone, with no download needed. Join the network and set Private Wi-Fi Address to Fixed before the first coin. Turn off mobile data and any VPN, then open http://10.0.0.1 in Safari and tap Pause Time. Resume in Safari on the same phone.

How do I pause piso wifi time without a pause button?

You cannot switch the feature on as a customer, but you can avoid paying for minutes you will not use. Ask the owner to pause the session from the admin panel. Use a voucher code and redeem it only when you are ready to browse, or pay in small amounts and top up as you go.

Final Recommendation

Also read: ORUS BIR Online Registration 2026: How to Register, Get a TIN, Digital TIN ID, COR and Update Your Records

For most readers, piso wifi pause time works when you pause before you step away, on the same phone. Check that the timer has stopped, because a frozen timer is the proof the feature worked on that machine. Start with a small payment and set a fixed Wi-Fi address before the first coin. Screenshot the paused screen, then ask the owner for the pause limit and expiry before a long break. Same device, same portal.

Similar Posts